When you lift your vehicle you need to correct the castor angle to retain good handling.
There is a few ways to achieve this, Offset bushes, Castor plates or Radius arms.
Offset bushes limit flex and will cause radius arm mounts to crack over time.
Castor plates will roll the diff and cause the tie rod to foul on the radius arms.
Castor corrected radius arms are the right way to do it with no downsides other than cost.
We offer a pair of 32mm thick powder coated radius arms, fitted with terrain tamer rubber bushes to return your vehicle to its correct castor after lifting it.
The same proven design we have been making our flipped arms out of for years.
ONE ITEM IN THE CART IS ONE PAIR
*please note photos show raw product but finished arms will be provided in powder coat black finish. These arms are to suit BENT model arms in a 79 series, some but not all DPF models are bent. please take this into consideration when ordering
Our 2" Arms offer 3.6 degrees of castor correction and a 10mm diff push
Our 4" Arms offer 7.7 degrees of castor correction and a 10mm diff push
Our 6" Arms offer 11 degress of castor correction and a 10mm diff push